Echo String Trimmer Bump Feed Troubleshooting

Find the most common problems that can cause a Echo String Trimmer not to work - and the parts instructions to fix them. Close the choke and remove the air cleaner cover then pull the filter out.

Troubleshooting An Echo String Trimmer Lawneq Blog

It might be able to be freed with 2 stroke oil in the cylinder.

Echo string trimmer bump feed troubleshooting. The troubleshooting section of their manuals is pretty basic but this is a resource available to you. Defective bump knob Many trimmers will use a bump knob that can be tapped on the ground to activate a spool inside the trimmer head to issue more line. 02 - Trimmer Line.

I reve the trimmer and back off and quickly hit the head on the ground - it is not. Periodically tap the head on the ground to. If you see no line sticking out of the ports on the trimmer head you may not have bump-fed the line often enough.

Push the bump head down with one hand and pull out line with your other hand until you can touch the cutting guard with the tip of the line. Run the trimmer at full throttle so that the line feeds properly from the cutting head. Make sure you are using the correct trimmer line for your string trimmer.

Be aware that if the line is not correctly wound on the spool or is melted it will not feed right. Weedeater EMMA The stringers head may not have the string wrapped properly onto it. If you use the trimmer too close to hard objects or if the middle of the line and not the tips is doing the cutting then the trimmer head could overheat and melt the line.

Remove all the string and replace the nylon line with appropriatecompatible line and try. I dont think all Stihl trimmers use the same head. If your Stihl and Ryobi string winding is the same as Echos you will find a string winding tutorial on Echos site.

If your Weed Eater trimmer has a bump-and-feed head then its line wont advance by itself as it would on an automatic-feed model. The trimmer line might be the wrong size. Does it screw off does the spool have to line up with the arrows or not.

If the trimmer line is too thick or too thin for the trimmer head the trimmer line wont feed. You can look up dealers in your area on the ECHO. A downside to having a string trimmer with an automatic feed system is that it runs through the entire spool of line faster compared to a trimmer with a bump feed system.

Ive been using a FS90R for 5 years two of them and have never had a feeding issue at all. I have the trimmer the Echo SRM 225 and the string broke and disappeared into the spool. How to Change the String on One of These.

If it doesnt move engine is seized. If the housing is cracked or chipped the line may be unable to feed. I cant wind new string theres no room and I cant get the dang thing off to take out the string.

I used the Stihl 095 string initially but switched to Echo Crossfire 095 because it lasts longer and never had a feeding. With the starter recoil removed. Remove spark plug and try to move engine manually.

So if the trimmer starts but does not run smoothly change the spark plug. When All Else Fails Visit Your Local Dealer. If this does not do the trick disassemble the string spool head and check for dirtdebriclean head.

I have only owned 3 trimmers and one the Weedeater was a failure when it came to feeding string. If not it will have to be rebuilt or scrapped altogether. Changing the string is a necessary evil in having a trimmer.

Finally dont forget your option of bringing your trimmer to an ECHO dealer. There is no nut to undo does it snap on and off. If you are unable to resolve the issue with your ECHO trimmer following these steps you may want to download the owners manual from the ECHO website.

Clean or replace the trimmers air filter and replace the fuel filter and spark plug if the trimmer starts and runs but will not accelerate. En español Live Chat online. When the string runs out you need to change it and this process can be intimidating for the lawn care novice.

In any case it is even considered as an upgrade from older string trimmers that make use of a bump feed system. Certainly you could look into purchasing a speed feed head but there are advantages to opting for a bump head trimmer. What model trimmer is it.

You may have to remove the trimmer head cover and manually feed line through the port. If the bump knob is defective or the spool is damaged for that matter the line wont feed properly. If the spark plug is new but the engine still runs intermittently the gas may be old or the gas and oil mix be be.

I tap my Echo with a reasonable thump on soil not a solid surface like pavement and not at high speed.

How To Replace Echo String Trimmer Line